Why Does My Traeger Keep Shutting Off (6 Common Reasons & Fixes)

When you buy through our links, we may earn a commission with no extra cost to you.

Imagine standing in front of your Traeger grill, eagerly anticipating a delicious meal, only to have it shut off unexpectedly. Frustrating, right? Well, fear not! In this article, we will delve into the reasons behind these sudden shutdowns and provide you with six common causes and their corresponding fixes.

From power supply issues to malfunctioning components, we’ll help you troubleshoot the problem and get your Traeger back up and running in no time.

So, let’s dive in and unravel the mysteries of why your Traeger keeps shutting off!

Power Supply Issues and Fixes

Check if your outlet is reliable and make sure the GFI isn’t tripped to troubleshoot power supply issues with your Traeger. Power surges or electrical problems can disrupt the flow of electricity to your grill, causing it to shut off unexpectedly.

Start by inspecting the outlet for any visible damage or loose connections. If the outlet appears to be in good condition, check the GFI (Ground Fault Interrupter) to ensure it hasn’t been tripped.

Additionally, examine the Traeger’s power cord for any signs of damage, such as bends, singing, or fraying. Inspect the wiring under the hopper to ensure it’s not worn out.

If you notice any damaged cords or components, it may be necessary to replace them to restore proper power supply to your Traeger.

Environmental Factors and Preventive Measures

Operating your Traeger in a sheltered environment can help prevent shutdowns caused by windy conditions. In extreme weather conditions, Traeger grills may shut off due to insufficient temperature in the fire pot or difficulties in igniting caused by wind.

It is important to consider the proper ventilation of your Traeger grill to ensure its optimal performance. Avoid using the grill in closed garages or sheds, as this can lead to ventilation issues and potential shutdowns.

Windy conditions can also prevent the Traeger from igniting properly, so it is crucial to find a protected area to operate the grill. By taking these preventive measures and ensuring proper ventilation, you can minimize the risk of Traeger shutdowns in extreme weather conditions.

Malfunctioning Components and Troubleshooting

To troubleshoot issues with malfunctioning components, you should observe the hot rod during a test run to identify any ignition or wood pellet lighting problems. Here are some steps to help you troubleshoot and fix common issues with the hot rod and RTD sensor:

  1. Hot Rod Issues:

    • Check if the hot rod struggles to ignite or keep the wood pellets lit.
    • If the hot rod is not glowing red or producing sparks, it may need replacement.
    • Ensure that the hot rod is securely connected to the wiring and properly positioned in the fire pot.
  2. RTD Sensor Problems:

    • A broken RTD sensor can cause temperature control issues.
    • Look for error codes indicating an issue with the internal probe and control panel.
    • Confirm the RTD sensor as the cause by comparing the digital display’s temperature reading with an external measurement.

Maintenance Tips for Proper Traeger Operation

Make sure you regularly clean the fire pot before each use to prevent issues in pellet grills. Cleaning techniques for the fire pot are crucial to maintain proper Traeger operation.

Start by removing any leftover ash or debris from previous cooks using a shop vac or ash vacuum. Next, take a small wire brush and scrub the inside of the fire pot to remove any buildup or clogs. Pay attention to the holes in the fire pot to ensure they are clear and unobstructed. If there is stubborn residue, you can use a putty knife or scraper to gently scrape it off.

Additionally, troubleshooting techniques for the fire pot include checking for any signs of damage or wear, such as cracks or rust. If you notice any issues, it may be necessary to replace the fire pot to ensure optimal performance.

Importance of Pellet Quality and Storage for Avoiding Shutdowns

Ensure you’re using fresh, dry pellets and storing them properly to avoid shutdowns on your Traeger grill. Proper pellet quality and storage are crucial for maintaining the performance of your grill.

Here are some tips to help you with pellet quality testing and proper storage:

  • Pellet Quality Testing:

  • Perform a visual inspection of the pellets for any signs of moisture or damage.

  • Test the pellets by squeezing them – they should be firm and not crumble easily.

  • Ignite a few pellets to check for a clean and consistent burn.

  • Tips for Proper Pellet Storage:

  • Store the pellets in a dry and ventilated area to prevent moisture absorption.

  • Use airtight containers or bags to protect the pellets from humidity.

  • Avoid exposing the pellets to direct sunlight or extreme temperatures.


So there you have it, the six common reasons why your Traeger grill keeps shutting off, along with their corresponding fixes.

By understanding and troubleshooting these issues, you can ensure that your grilling experience is uninterrupted and enjoyable.

Remember, just like any other appliance, regular maintenance is key to keeping your Traeger grill running smoothly.

So take care of your grill, use high-quality pellets, and store them properly to avoid any shutdowns.

Happy grilling!