Blackstone Igniter Not Clicking

When you buy through our links, we may earn a commission with no extra cost to you.

You’re frustrated. Your Blackstone igniter isn’t clicking, and you’re left wondering what could be causing this issue. Well, fret not! In this article, we will explore the possible causes for igniter failure and provide you with troubleshooting steps to resolve the problem.

We’ll even guide you through testing the igniter for functionality and replacing it if necessary. Plus, we’ll share maintenance tips to prevent future igniter problems.

Say goodbye to the frustration and hello to a fully functional igniter!

Key Takeaways

  • Buildup of dirt or debris on the igniter can cause it to fail.
  • Lack of clicking sound or visible spark indicates a potential issue with the igniter.
  • Cleaning the igniter and checking for proper gas supply connection can help troubleshoot the problem.
  • Testing the igniter for functionality and signs of a faulty igniter can help determine if replacement is necessary.

Possible Causes for Igniter Failure

One possible cause for your igniter not clicking could be a buildup of dirt or debris. Common igniter problems often arise due to this issue. Over time, small particles can accumulate on the igniter, obstructing its functionality.

Signs of a failing igniter may include a lack of clicking sound when you turn on the appliance, or the absence of a visible spark. To address this problem, you can start by turning off the gas supply and disconnecting the grill from the power source.

Gently remove the igniter and clean it using a soft brush or a toothpick. Ensure that you remove all the debris and dirt from the igniter’s tip. Once cleaned, reconnect the igniter and test it to see if it clicks properly.

Troubleshooting Steps for Igniter Issues

To troubleshoot issues with the igniter, start by checking if the gas supply is properly connected. A common problem with igniters is that they fail to create a spark, preventing the grill from lighting. Here are some troubleshooting steps you can take to address this issue:

  • Check the gas supply: Ensure that the gas tank is properly connected and turned on. Inspect the gas hose for any leaks or damage.

  • Inspect the igniter wire: Make sure the wire connecting the igniter to the control panel is securely attached. Look for any signs of wear or fraying.

  • Clean the electrode: Remove any debris or grease buildup from the electrode, which is the part that generates the spark. Use a wire brush or a soft cloth to gently clean it.

  • Test the battery: If your igniter is battery-powered, check if the battery needs to be replaced. Install a fresh battery to see if it resolves the issue.

How to Test the Igniter for Functionality

Check if the igniter is functioning properly by pressing the ignition button and listening for a clicking sound. If you don’t hear a clicking sound, it could indicate a faulty igniter.

To troubleshoot potential issues, start by checking the battery and making sure it is properly installed and has sufficient power. Next, inspect the wires connecting the igniter to the battery and ensure they are securely attached and undamaged.

If the battery and wires are in good condition, the problem may lie with the igniter itself. Common signs of a faulty igniter include a lack of spark, inconsistent clicking sounds, or visible damage to the igniter. If these signs are present, it may be necessary to replace the igniter to restore proper functionality.

Replacing the Igniter: Step-by-Step Guide

Make sure you have all the necessary tools, such as a screwdriver and replacement igniter, before starting the process of replacing it.

To replace the igniter on your Blackstone grill, follow these step-by-step instructions:

  • Turn off the gas supply to the grill and disconnect the propane tank. Safety first!

  • Locate the igniter assembly, usually near the burner, and remove any screws or fasteners holding it in place.

  • Carefully disconnect the wires connected to the old igniter, noting their positions for reassembly later.

  • Install the new igniter by connecting the wires to the corresponding terminals, ensuring a snug fit.

  • Reattach the igniter assembly to its original position and secure it with the screws or fasteners.

  • Reconnect the propane tank and turn on the gas supply.

Following these igniter replacement tips will help you resolve common igniter problems and get your Blackstone grill up and running again in no time.

Preventing Future Igniter Problems: Maintenance Tips

To prevent future igniter problems, remember to regularly clean your grill and remove any debris or grease buildup that may interfere with the igniter’s functionality.

Igniter issues are often caused by common mistakes when using a Blackstone igniter. One mistake is not properly cleaning the igniter after each use. Over time, grease and debris can accumulate on the igniter, causing it to malfunction.

To properly clean a Blackstone igniter, start by turning off the gas and disconnecting the propane tank. Remove the grates and heat diffuser to access the igniter. Use a soft brush or cloth to gently clean the igniter, removing any dirt or grease. Be careful not to damage the wires or electrodes.

Once cleaned, reconnect the propane tank and test the igniter to ensure it is working properly.

Regular maintenance and proper cleaning will help extend the lifespan of your Blackstone igniter.

Frequently Asked Questions

What Are the Possible Causes for the Igniter Failure?

Possible causes for igniter failure include a worn-out battery, loose connections, or a faulty ignition switch. To fix a faulty igniter, check the battery, tighten connections, or replace the ignition switch if necessary.

What Are the Troubleshooting Steps for Igniter Issues?

To troubleshoot igniter issues, start by checking the battery, wire connections, and electrode alignment. If the igniter still doesn’t click, try cleaning the electrode and adjusting the gap. Remember, safety first!

How Can I Test the Igniter for Functionality?

To test the igniter’s functionality, you can follow these steps. First, check for physical damage or loose connections. Then, use a multimeter to measure the voltage output. If it’s not within the specified range, consider replacing the igniter.

Can You Provide a Step-By-Step Guide for Replacing the Igniter?

To replace the igniter, start by disconnecting the power source. Remove the old igniter by unscrewing it from the burner. Install the new igniter, ensuring it is securely attached. Reconnect the power and test for functionality.

What Are Some Maintenance Tips to Prevent Future Igniter Problems?

To prevent future igniter problems, take preventive measures. Clean the igniter regularly using a soft brush and ensure it is properly aligned. Check for loose connections and replace faulty parts promptly.


In conclusion, troubleshooting and replacing a faulty blackstone igniter can be a straightforward process with the right steps and guidance. By following the troubleshooting steps and conducting a functionality test, you can easily identify and resolve the issue.

Remember, just like maintaining a well-oiled machine, proper maintenance is key to preventing future igniter problems. Treat your igniter like the spark that ignites the fire of your grilling experience, and with a little care and attention, you’ll keep the flames roaring for many cookouts to come.